metal screen door repair

Call Now

Satisfaction Guaranteed

(226) 241-3525

Do you have a metal screen door that needs repairing? If so, you’re in luck! This is the ultimate guide to metal screen door repair. We’ll walk you through the entire process, step-by-step. Plus, we’ve included some helpful tips and tricks that will make the process a lot easier for you. So, what are you waiting for? Let’s get started!

Types of metal screen doors 

There are two types of metal screen doors: sliding and hinged. Sliding doors are the most common type of metal screen door, and they’re also the easiest to repair. Hinged doors are a bit more complicated, but we’ll walk you through the process step-by-step.

The tools you’ll need for metal screen door repair

– A screwdriver

– A hammer

– A drill

– A measuring tape

– Replacement screen material

– New screen door hardware (optional)

How to take the door apart 

The first step is to take the door apart. This is pretty straightforward for a sliding door, but a bit more complicated for a hinged door.

For a sliding door, start by removing the screws that hold the track in place. Then, lift the door out of the track and set it aside. For a hinged door, start by removing the screws that hold the hinges in place. Then, carefully remove the door from the frame.

Once you have the door removed, it’s time to start repairing it.

How to replace the metal screen 

The next step is to replace the screen. This is a pretty easy process, but there are a few things you need to keep in mind. First, make sure you measure the screen so it’s the same size as the old one. Second, be careful not to rip or tear the new screen when you’re installing it.

To install the new screen, start by attaching it to the top of the door frame. Then, stretch it down and attach it to the bottom of the frame. Finally, stretch it across and attach it to the sides of the frame.

How to reattach the screen door 

Once you have the new screen in place, it’s time to reattach the door. For a sliding door, start by putting the door back on the track. Then, replace the screws that hold the track in place. For a hinged door, start by attaching the hinges to the door. Then, put the door back in the frame and replace the screws that hold the hinges in place.

And that’s it! You’ve successfully repaired your metal screen door. Wasn’t that easy? We told you it was easy! Now that you know how to do it, you can repair any metal screen door in no time. So, the next time one of your doors needs repairing, don’t hesitate to give it a try. You might be surprised at how easy it is.


So there you have it! Our ultimate guide to repairing metal screen doors. We hope this guide was helpful and that you now feel confident in your ability to repair any metal screen door. If you do not want to do it by yourself, then you should only look for professionals and experts who do metal screen door repair.

Do you have any tips or tricks for repairing metal screen doors? Let us know in the comments below!


5/5 - (1 vote)
Contact Us
Our technicians are equipped with masks and gloves complying with health and safety regulations.
This is default text for notification bar